CHiNT Electric

CHINT – Leading Brand in Switchgear

CHINT group provides safe, reliable, and stable industrial electrical equipment’s and solutions for energy efficient management systems.With 35 years of development, CHINT has grown to be Asia’s largest low-voltage electrical product supplier and is the leading brand of the whole industry chain in industrial electric in Asia.CHINT has developed business network in over 140 countries and regions with more than 30,000 employees.CHINT has 18 professional technology research institutes and 3 overseas R&D centers. CHINT has won more than 4,000 patent licenses and 5,000 patent applications.

Chint Catalogue / Pricelist

Mini Contactor

NC6 Mini Contactor-(06A, 09A)

The NC6 Series Mini Contactor is used in remote motor (≤4kW) control application.
Rating up to 690V, 9A (AC-3). —– (06A, 09A)
Standard: IEC/EN 60947-4-1
Two kinds of mounting available: Normal type (without pins); Pin type (with pins)
Ambient temp: -5℃~+40℃
Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 400V;
Auxiliary contacts: NCF6-20 & NCF6-02 (2NO or 2NC)
NCF6-13 & NCF6-31 (1NO & 3NC or 3NO & 1NC)
NCF6-40 & NCF6-04 (4NO or 4NC)
Assemble with Thermal Overload Relay NR2-11.5 to be a DOL Starter

NXRC Contactor Relay (Auxiliary Contactors)

The NXRC series contactor relay is used in relay control, signal transmission and isolation amplifier application

Standard: IEC/EN 60947-5-1
Ambient temp.: -35℃~+70℃
Rating up to 690V, Ith=10A

Top mounting auxiliary contacts:

Contact combination: 4NO or 3NO&1NC or 2NO&2NC or 1NO&3NC or 4NC

Coil Voltage:

AC: 24V, 36V, 48V, 110V, 127V, 220V, 380V, 415V (AC)
DC: 24V, 48V, 110V, 220V (DC)

NC1 Contactor and Overload Relay

NC1 Contactor (AC3 - 09A-95A)

The NC1 Series Contactor is used in remote motor (≤45kW) control application.
Rating up to 690V, 95A (AC-3). —– (09A, 12A, 18A, 25A, 32A, 40A, 50A, 65A, 80A, 95A)
Standard: IEC/EN 60947-4-1
Ambient temp: -25℃~+55℃
Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V,
380V, 415V, 440V, 480V, 500V, 600V, 660V
Coil voltage (DC): 24V, 36V, 48V, 110V, 220;
Side & Top mounting auxiliary contacts
Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay)
Assemble with Thermal Overload Relay NR2 (or NRE8) to be a DOL Starter.
Assemble with another one & F4 & F5 & NR2 (or NRE8) to be a Star-Delta Starter Type QJX2;
Assemble with a current limiting block to be a Capacitor Contactor.
Assemble with another one to be a reversing contactor.

NC1-Z(N) DP Contactor (AC3 – 25A & 40A, 2N0+2NC Main Contacts, 48VDC Coil)

Used for long-distance circuit making and breaking

Rated working voltage up to 690V, 25A and 40A (AC-3)
w/ 2 NO 2 NC main contacts
Compliance standards: IEC / EN 60947-4-1
Ambient air temperature: -25℃~+55℃,
Coil voltage: DC 48V
Can form into reversible contactor with other AC contactors

NR2 Thermal Overload Relay

NR2 series thermal overload relay is used to provide overload and phase failure protection for AC motors.

Contacts: 1N0+1NC (Electrical separated / Potential Free)
Test / Hand & Self Reset
Rating up to 690V, 630A. —– (11.5A, 25A, 36A, 93A, 150A, 200A, 630A)
Standard: IEC/EN 60947-4-1
Ambient temp: -5℃~+40℃
NR2 Assemble with Contactor NC1, NC2, NC7 to be a DOL Starter.

NC2 Contactor and Overload Relay

NC2 Contactor (AC3- 115A to 800A)

Rating up to 690V, 800A (AC-3) —– (115A,150A,185A,225A,265A,330A,400A,500A,630A,800A)
Standard: IEC/EN 60947-4-1
Ambient temp: -5℃~+40℃
Coil voltage (AC): 110V, 127V, 220V, 230V, 380V, 400V;
Top mounting auxiliary contacts: F4-20 & F4-02 & F4-11 (2NO or 2NC or 1NO & 1NC)
F4-13 & F4-31 (1NO & 3NC or 3NO & 1NC)
F4-40 & F4-04 & F4-22 (4NO or 4NC or 2NO & 2NC)
Top mounting time delay block: F5-T (making time delay); F5-D (breaking time delay)
Assemble with Thermal overload Relay NR2 to be a DOL Starter.
Assemble with another one to be a reversing contactor.

NR2 Thermal Overload Relay

NR2 series thermal overload relay is used to provide overload and phase failure protection for AC motors.

Contacts: 1N0+1NC (Electrical separated / Potential Free)
Test / Hand & Self Reset
Rating up to 690V, 630A. —– (11.5A, 25A, 36A, 93A, 150A, 200A, 630A)
Standard: IEC/EN 60947-4-1
Ambient temp: -5℃~+40℃
NR2 Assemble with Contactor NC1, NC2, NC7 to be a DOL Starter.

CJ19 Capacitor Switching Contactor

CJ19 Capacitor Switching Contactor (12.5 KVAR to 90 KVAR)

The CJ19 Series Contactor is used in remote capacitor (130kvar) switch application.

Rating up to 400V, 130A (AC-6b). —– (25A, 32A, 43A, 63A, 95A,115A,150A,170A)
Standard: IEC/EN 60947-4-1
Ambient temp: -5℃~+40℃
Coil voltage (AC): 24V, 36V, 48V, 110V, 127V, 220V, 230V, 380V, 415V, 440V, 480V, 500V
CJ19-25: Rating current 17A (AC-6b/380V);
Power of controlled capacitor≤12.5kvar.
CJ19-32: Rating current 23A (AC-6b/380V);
Power of controlled capacitor≤20kvar.
CJ19-43: Rating current 29A (AC-6b/380V);
Power of controlled capacitor≤25kvar.
CJ19-63: Rating current 43A (AC-6b/380V);
Power of controlled capacitor≤33.3kvar.
CJ19-95: Rating current 72.2A (AC-6b/400V);
Power of controlled capacitor≤50kvar.
CJ19-115: Rating current 87A (AC-6b/400V);
Power of controlled capacitor≤60kvar.
CJ19-150: Rating current 115A (AC-6b/400V);
Power of controlled capacitor≤80kvar.
CJ19-170: Rating current 130A (AC-6b/400V);
Power of controlled capacitor≤90kvar

NXC AC Contactor and Overload Relay

NXC AC Contactor (AC3- 6A to 630A) & NXC Mini Contactors (6A,9A,12A)

The NXC series AC contactor is used in remote motor (≤335kW) control application.

Rating up to 690V, 630A (AC-3). ——(6A, 9A, 12A, 16A, 18A, 22A, 25A, 32A, 38A, 40A, 50A, 65A, 75A, 85, 100A, 120A, 160A, 185A, 225A, 265A, 330A, 400A, 500A, 630A)
Standard: IEC/EN 60947-4-1
Ambient temp.: -35℃~+70℃
Coil voltage 6A~12A (mini type): 24V, 36V, 48V, 110V, 127V, 220V, 380V, 415V (AC)
Coil voltage AC : 6A~225A: 24V, 36V, 48V, 110V, 127V, 220V, 380V, 415V (AC)
Coil voltage AC/DC : 265A~630A: 24V, 36V, 48V, 110V, 127V, 220V, 380V, 415V (AC/DC)
Coil voltage DC: 24V, 48V, 110V, 220V (DC)
Side mounting and Top Mounted auxiliary contacts
Top mounting time delay block: F5-T (making time delay) & F5-D (breaking time delay)
Assemble with Thermal Overload Relay NXR to be a DOL Starter.
Assemble with another one to be a reversing contactor.

NXR Thermal Overload Relay

The NXR series thermal overload relay is used to provide overload and phase failure protection for AC Motors

Rating up to 690V, 630A (AC-3): —— (12A for mini type, 25A, 38A, 100A, 200A, 630A)
NXR-200 and NXR-630 are electronic overload relay.
Standard: IEC/EN 60947-5-1
Ambient temp.: -35℃~+70℃

MPCB

Rated Operational Voltage: 230V,415V,690VAC
Type NS25- Push Button and Type NS25X- Rotary Knob
Current Rating: (0.1-0.16A) to (20-25A)
NS280B –(16-25A) to (56-80A)
Accessories: Front or Side Aux Contacts
Fault signalling Contact, UVR,Shunt
Certification: CE / UL
Standard: IEC/EN-60947-2

NJYB3 Relay

NJYB3 relay is used to provide overvoltage, under voltage, phase failure, phase sequence and three-phase unbalance control in three-phase three-wire 380V circuits and three phase four-wire 220V circuits with a frequency of AC 50Hz (or 60Hz).

For example, it is used for power control systems, air conditioning systems and motors.

NJS5 Time Delay Relay

NJS5 series time relay mainly used as time control component for control circuit, rated control power supply voltage 240VAC & 415VAC 50/60Hz, make or break the circuit at a preset time.

Indication of operational states with LEDs. DIN rail mounting and compact 18 mm design.

NJBK2 Motor Protection Relay

NJBK2 series motor protection relay (herein after referred to protector as simply) is applicable for overload, locked-rotor, phase-failure, three phase current unbalance, earthing and PTC temperature protection of AC motor @ A.C.50Hz, less than 690V rated insulation voltage and 1A ~ 800A rated operating current for its continuous working or discontinuous working. NJBK2 This product meets the requirements of IEC 60947- 4-1.

NJBK7 Motor Protection Relay

Standard: IEC 60947-4-1
Rating current: 1A~800A, Rogowski coil is applied for high curren.t
Rating control voltage: 50Hz AC220V, AC230V, AC240V, AC380V, AC400V, AC415V.
Trip class: 5, 10A, 10, 20, 30.
Various motor protection functions, with RS485 interface and 4mA-20mA analog transmission interface for communication and monitor.
With LED display and setting button, smaller size can save installation space.
Can operate for auto-coupling or star-delta start.57

NJX-13FW - Miniature Power Relay & Relay Base/Socket

(5A and 10A Switching Capacity)General Purpose Relay

JMK-2P - Miniature Power Relay & Relay Base/Socket

(10A Switching Capacity)

Type “eBG” (6KA/B,C Curve)

Function

Protection of circuits against short-circuit currents, protection of circuits against overload currents switch & isolation

Selection

Technical data of the network at the point considered: the earthing the earthling system (TNS, TNC), short-circuit current at the circuit at the circuit-breaker installation point which must always be less than the breaking capacity of this device, network normal voltage.

Tripping Curves:

B-curve (3-5In) protection for people and big length cables in TN and IT systems.
C-curve (5-10In) protection for resistive and inductive loads with low inrush current

MCB Features:

Range available from 1A to 40A
Single pole to Four pole – C curve
Rated voltage: 230/400~240/415
Rated breaking capacity: 6kA
Confirm to IEC 60898-1 & IEC 60947-1(8-12 In) / ISI Marking

MCB Type NB1-63H (10KA/ B, C, D Curve)

Function

Protection of circuits against short-circuit currents, protection of circuits against overload currents switch & isolation

Selection

Technical data of the network at the point considered: the earthing the earthling system (TNS, TNC), short-circuit current at the circuit at the circuit-breaker installation point which must always be less than the breaking capacity of this device, network normal voltage.

Tripping Curves:

B-curve (3-5In)
C curve (5-10In)
D curve (10-14In)

MCB Features:

Range available from 1A to 40A
Single pole to Four pole – C curve
Rated voltage: 230/400~240/415
Rated breaking capacity: 6kA
Confirm to IEC 60898-1 & IEC 60947-1(8-12 In) / ISI Marking

MCB Type NB1-63DC for Photovoltaic (Solar System)

Ambient temp.: -35℃~+70℃
Range 1A to 63A
Pole: 1P, 2P, 4P
Tripping curves: C curve (7-10In)
Breaking Capacity :6KA

RCCB

Sensitivity: 10 mA,30mA,100mA,300mA @ 6KA/10KA
Current Rating: 16A,25A,32A,40A,63A
Pole: 2P,4P
Type A and AC

NM1B Series MCCB

Standard: IEC 60947-2。
Application: Power Distribution
Insulation Voltage :800VAC
Pole: 1P,3P MCCB
Range 10A to 125A @ 415V (3P), 230V / 240V (1P),50Hz
Breaking Capacity: 10KA
Release: Fixed Thermal Magnetic

NM1 - Series MCCB

Circuit breakers and auxiliaries comply with the international standard:

IEC/EN 60947-1: general rules
IEC/EN 60947-2: circuit breakers
Application: Power Distribution and Motor Protection
Rated current from 10 to 1250A @ 690VAC,50/60Hz
Release: fixed thermal and fixed magnetic trip.
Complete range of one, two, three and four-pole version
Breaking capacity (Icu) : 15KA,20KA,25KA,35KA,50KA,65KA, 70kA
Vertical/horizontal installation
A complete system of add-on modules for NM1
Operation: Manual / Rotary Handle / Motorised.

NXM / NXMS Series MCCB

Standards: IEC/EN 60947-1, 60947-2
-35℃~+70℃ operating temperature range
Certification: CB, CE, KEMA
NXM Frame current: 63/125/160/250/400/630/800/
1000/1250/1600A (Fixed TM Release)
NXMS: Adjustable Electronic MCCB
Rated voltage: 220/230/240;380/400/415V
Operational Voltage 690VAC
Breaking capacity: 20KA,25KA,35KA 50KA/70KA
With Complete accessories
Modbus Communication Module –COMA-3 for NXMS MCCB.
Installation method: Fixed type; plug-in type
Dual insulation design

NM8N Series Moulded Case Circuit Breaker (For Global Market)

Ambient temperature: -40℃ ~+70℃
Rated insulation voltage: 1000V
Frame Size current: 125, 250, 400, 630, 800, 1600A
Poles: 1P 2P 3P 4P
AC MCCB: Rated Voltage Ue(V)： AC 380/400/415, 440, 500, 660/690V
DC MCCB:
DC250V 1P / DC500V 2P in series
DC750V 3P in series / DC1000V 4P in series
Rated ultimate short-circuit breaking current(kA): 36, 50, 75, 100, 150KA
Rated service breaking current(kA): Ics = 100%Icu
Utilization category: A (Thermal-magnetic) B (Electronic)
Release units Type:
Thermal magnetic (TM), Magnetic (M), Electronic-LCD Display (EN&EM), Electronic type for motor protection (ENM&EMM)
Standard complied: IEC/EN 60947-2

DZ 158 Series DIN Rail- MCCB (Higher Rating MCB)

Protection of circuits against short-circuit & overload
Rated current In :63A, 80A, 100A, 125A
Poles :1P, 2P, 3P, 4P
Rated voltage Ue :230/400~240/415 Volts
Rated breaking capacity: 6/10 kA
Confirm to IEC60947-2

NHR40 Fuse-Switch Disconnector

Rated current: 160~630A.
AC Rated voltage AC690V,50Hz Duty: AC22/AC23
DC: DC440V and below
NHR40 series are infrequently manually operated multipolar fuse combination switches,
NHR40 break or switch off on load and provide safely isolation and protection against overcurrent for any voltage electrical circuit.
Standard: IEC/EN 60947-3.

HH15-QSA Fuse-Switch Disconnector

Rated current: 63~630A
Duty : AC22
Rated voltage AC690V,50Hz Duty
Standard: IEC/EN 60947-3.

Mainly used in the distributing and motor circuit which has high short-circuit current They provide safety isolation and protection against overcurrent for any low voltage electrical circuit.

NHR17 Fuse-Switch Disconnector

NHR17 FSD series fuse-swith disconnector is a new product developed by our company.

Rated insulation voltage up to 800V.
Rated operational voltage up to 690V@50Hz
Current 32A to 630A

In the distribution circuit and motor circuit which has high short-circuit current as the power switch, isolating switch,

Emergency switch as well as circuit protection,but normally it is not used to make and break a single motor directly.

Standard: IEC/EN 60947-3.

NHRT40 Vertical Fuse-Switch Disconnector

Space saving in panel, suitable as a main incomer to building / offices where power comes from utility boards

Standard: IEC/EN 60947-3.
Rated current: 160~630A.
They break or switch off on load and provide safely isolation and protection against overcurrent for any voltage electrical circuit.

NH40 Fuse-Switch Disconnector

Application

NH40 series Switch-disconnector is applicable for AC 50Hz, rated voltage AC 690V and below,
DC440V and below, rated current up to 3150A.

In the industrial enterprise power distribution equipment，it can be used to connect and disconnect the circuit and isolate the power supply frequently, especially the 125A~630A can be used as frequent connected and broken.

Standard: IEC/EN60947-3.

Knife Contact Fuses

Rated current range: 4A ~ 1250A ,50Hz
Rated voltage: to AC690V
Rated breaking capacity:120kA
Category: gG type
Open structure, good heat dissipation condition
Mainly used for electrical circuit overload and short circuit protection
Standards compliant: GB/T 13539.2, IEC60269-2

Cylindrical Fuses & Base

Cylindrical Fuses & Base(For Solar)

Control Fuses, Cylindrical BS Type)

Rated current range: 2A-32A ~ 63A
Rated breaking capacity: 100kA
Rated voltage: to AC500V
Standards compliant: GB/T 13539.2, IEC60269-2
Category: gG type
Patented appearance, modular design, practical and good-looking
Rail mounting, easy and fast
Mainly used for electrical circuit overload and short circuit protection

Note: this type of fuse is not recommended for capacitor cabinet

NXZM Series ATS (CB Type)

NXZM Series Automatic Transfer Switching Equipment is applicable to three-phase four-wire duplicate supply grid of AC 50/60Hz, rated voltage 400V/415V and below, rated current 800A, and can switch one or several load circuits from one power source to the other to ensure the normal power supply of the load circuit.
This product is applicable to industrial and commercial power use places, high-rise buildings, and residential houses.

Standard：IEC 60947-1, IEC 60947-6-1.

NXA Air Circuit Breaker

Real Time Temperature Sensor (Optional)
Continuous function monitoring
More accurate risk identification
Frame size(A): 1600,2000,3200,4000
Breaking capacity: 42KA,50KA,55KA,80KA,100KA
Rated operational voltage Ue(VAC): 380/400/415
Number of poles: 3P,4P
Installation method: draw-out type, fixed type
Wiring type: horizontal rear connection
Ambient Temperature: -5℃-+40℃…. Also operate at Temperature -35℃-+70℃
Protection grade: Front IP 20, other side IP 00
Intelligent Controller / Microprocessor Release
M Type (Basic) LSIG
A Type: M type LSIG + Current Measurement with display
Current Unbalance Protection
P Type (Power)
H Type (Harmonics) with Communication.

Starter

NQ3 Series DOL Electromagnetic Starter

Range 3KW / 5.5KW/11KW
Current Range : 17-25A
AC660VAC @50/60Hz
Coil Voltage: 380VAC,220VAC,415VAC

NQ 2 DOL Starter

- Motor KW Range: Up to 33KW
- Current: Up to 68Amps
- AC660VAC @50/60Hz
- Coil Voltage: 380VAC,220VAC,415VAC
- To start/Stop/Protect the motor from overload & single phase.